Fluke 80i-110s AC/DC Current Clamp (FLK-80I-110S)

SKU FLK-80I-110S

Manufacturer: Fluke

The Fluke 80i-110s is a clamp-on AC/DC Current Probe that reproduces current waveforms found in commercial and industrial power distribution systems. The Probe performance is optimized for accurate reproduction of currents at line frequency and up to the 50th harmonic waveform. The 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001.

$1,444.31 - $1,444.31

$1,444.31

$1,444.31 - $1,444.31

$1,444.31

Availability:

In stock

Quantity

Same Day Shipping
for most orders received before 2pm

FEATURES

Accurate AC, DC, and AC+DC current measurements for Electrical, Electronic, and Automotive applications.
Shielded for high-noise immunity around electronic motor drives and ignition systems. 6Wide measurement range from 50 mA to 100 A, useful to 10 mA.
Jaw shaped for easy access to cramped spaces.
Safety-designed 600 V insuIated BNC - compatible with Fluke ScopeMeter® test tools, Power Harmonic analyzers and oscilloscopes.
Current Range: 0.1 to 100A DC or 0.1 to 70A AC
Basic Accuracy (DC to 1kHz): 100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA, 10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA, 40A to 80A +/- 12% of reading + 50mA, 80 to 100A +/- 15% of reading
Output Signal: 10A range: 100mV/A | 100A range: 10mV/A
Bandwidth: 1Hz to 20kHz
Working Voltage: 600V AC rms
Maximum Conductor Size: 11.8 mm (.46 inch) diameter
Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V

Accurate AC, DC, and AC+DC current measurements for Electrical, Electronic, and Automotive applications.
Shielded for high-noise immunity around electronic motor drives and ignition systems. 6Wide measurement range from 50 mA to 100 A, useful to 10 mA.
Jaw shaped for easy access to cramped spaces.
Safety-designed 600 V insuIated BNC - compatible with Fluke ScopeMeter® test tools, Power Harmonic analyzers and oscilloscopes.
Current Range: 0.1 to 100A DC or 0.1 to 70A AC
Basic Accuracy (DC to 1kHz): 100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA, 10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA, 40A to 80A +/- 12% of reading + 50mA, 80 to 100A +/- 15% of reading
Output Signal: 10A range: 100mV/A | 100A range: 10mV/A
Bandwidth: 1Hz to 20kHz
Working Voltage: 600V AC rms
Maximum Conductor Size: 11.8 mm (.46 inch) diameter
Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V

❮ ❯