MG Chemicals

For encapsulating and potting electronics in high temperature environments, aggressive chemical environments, or where improved technology protecti...

Excellent for potting solar cells for maximum light transmission and electronic assemblies where component identification is desirable. Has low vis...

Excellent for potting and encapsulating electric motors and transformers. Also used for fabrication of rubber parts and casting molds for low-melt...

Excellent for insulating, sealing, bonding and formed-in-place gaskets. Can be applied to vertical and overhead surfaces. Not for use in delicate e...

Non-corrosive. Bond capacitors, resistors and integrated circuits to PCB seals, exposed wires, fraying surfaces and connectors. Meets MIL-A-46146B....

Excellent for insulating, sealing, bonding and formed-in-place gaskets. Can be applied to vertical and overhead surfaces. Not for use in delicate e...

A water repellant, non-melting, dielectric grease lubricant. Provides superior corrosion protection. Lubricates and protects against moisture. Comp...

100% solids. Formulated with undiluted Bis F resin for superior physical properties, and pigmented with high purity aluminum oxide pigment to provi...

100% solids. Formulated with undiluted Bis F resin for superior physical properties, and pigmented with high purity aluminum oxide pigment to provi...

Clean your most expensive screens with confidence. Now you can take it anywhere with our new individual packs. Gentle formula cleans LCD screens on...

8241-175 is a 70/30 isopropyl alcohol electronics cleaner. The liquid is fully miscible with water and a large variety of organic solvents, making ...

8241-175 is a 70/30 isopropyl alcohol electronics cleaner. The liquid is fully miscible with water and a large variety of organic solvents, making ...

The 8241 Isopropyl Alcohol 70/30 is an electronics cleaner. The liquid is fully miscible with water and a large variety of organic solvents, making...

The 8241 Isopropyl Alcohol 70/30 is an electronics cleaner. The liquid is fully miscible with water and a large variety of organic solvents, making...

8241-140 is a 70/30 isopropyl alcohol electronics cleaner. The liquid is fully miscible with water and a large variety of organic solvents, making ...

Tip Tinner is a mixture of solder powder and thermally stable, oxide-reducing compounds. Used to repair oxidized soldering tips for optimal perform...

A spreadable, non-corrosive, translucent paste. Excellent for sealing and bonding electronic components to printed circuit boards and protecting co...

832B potting and encapsulating compound is a black, general purpose, hard, two-part epoxy that offers extreme environmental, mechanical and physica...

842AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with an extremely conductive silver flake. It is sm...

842AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with an extremely conductive silver flake. It is sm...

Use when cleaning and lubricating controls. Contains a light, electronic grade, mineral oil lubricant. Cleans and lubricates controls, locks, hing...

832B potting and encapsulating compound is a black, general purpose, hard, two-part epoxy that offers extreme environmental, mechanical and physica...

8329TFM is a thermally conductive two-part epoxy adhesive. It is dark grey, smooth, thixotropic, and bonds well to a wide variety of substrates. T...

This thermal epoxy glue is a 2-part, 1-1 system with a set time of only 15 minutes. It is a smooth off-white paste that cures to form a hard, durab...