Motors

Vibrating Disk Motor - 14mm (0.55") diameter, 3.5mm (0.15") thick. This little vibe motor is quite unique in that it is fully self-contained - no v...

Pager motor technology has made it easier for us to find a suitable replacement for the original TPM for substantially less! Want to build somethi...

This high-power motor fits in the GM2/3/8/9 series of gear motors, offering approximately 3 times the speed, twice the torque and quadruple the pow...

This 030 form-factor motor with precious-metal brushes offers pretty good performance for a flat-sided motor. Offering 7400 rpm @ 4.7V, drawing 150...

The GM8 is much like the GM2 gear motor but runs at nearly twice the speed. This 143:1 gear motor spins at 70RPM at 5V, drawing 670mA at stall gene...

The GM7 is a baby version of the popular GM3 gear motor. Designed by Mark Tilden to have tighter tolerances and better performance than a regular t...

The GM6 is a baby version of the popular GM2 gear motor. Designed by Mark Tilden, the GM6 has tighter tolerances and better performance than a regu...

These impressive 224:1 gear motors are very comparable to a hobby servo for power, at a fraction of the cost! This motor offers 50 inch-ounces of t...

81:1, 370RPM, 24.6mA (184mA stall) at 5V gives 3.6in*oz torque. Not bad, eh? They're a bit funky in that they're not continuous rotation by defaul...

Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers.This smaller solenoid is designed to work...

Voltage: 4.2V (nominal) Body: 5mm (dia.) x 15mm (length) Shaft: 0.8mm (dia.) x 3.5mm (length) Weight: 1.7g

Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn’t know how? Well, here’s how: The 12V solenoi...

The A1-16 Smart Servo from XYZrobot provides temperature, speed, and position sensing functions.

Operating voltage: 6-24V Nominal voltage: 12V Speed (unloaded): 11000rpm Current (unloaded): 0.18A Speed (max): 8768rpm Current (max): 0.726A Torq...

Operating voltage: 2.5-6V Nominal voltage: 6V Speed (unloaded): 14500rpm Current (unloaded): 0.21A Speed (max): 12530rpm Current (max): 1.34A Torq...

Voltage Range: 4.8 – 7.2 Volts Stall Torque (6.0V): 11 kg.cm Stall Torque (4.8V): 9.4kg.cm JR Wire Configuration No-load Speed (6.0V / 4.8V): 0....

Voltage Range: 4.8 – 7.2 Volts Stall Torque (6.0V): 4.1 kg.cm Stall Torque (4.8V): 3.2kg.cm JR Wire Configuration No-load Speed (6.0V / 4.8V): 0...

Voltage Range: 4.8 – 7.2 Volts Stall Torque (6.0V): 4.1 kg.cm Stall Torque (4.8V): 3.2kg.cm JR Wire Configuration No-load Speed (6.0V / 4.8V): 0...

Suitable for hobby, models, science and other projects.

Voltage: 12VDC Voltage range: 6 - 18VDC Speed (no load): 121 RPM Current (no load): 0.15A Rated Torque: 1.5 kgf-cm Gear ratio: 1:78 Shaft diameter...

301 DC Motor Gear Ratio: 12:01 Motor RPM: 3500 Motor Voltage: 3V Speed: 300 RMP @3V Shaft Length: 60mm Shaft Diameter: 2mm Size: 40x40x15mm

DC Motor F130 Gear Ratio: 144:1 Motor RPM: 17000 Motor Voltage: 3V Speed: 118 RMP @3V Shaft Length: 80mm Shaft Diameter: 2mm Size: 50x40x30mm

R540 Brushed DC Motor is suitable for hobbies, models, science and other projects.

Servo with metal gears Rotation: 90 degrees Voltage range: 4.8 - 6V Speed @4.8V: 0.12; @6V: 0.10 sec/60º Torque @4.8V: 1.2; @6V: 1.5 kg/cm Dimensi...