Accessories

Build a genuine BASIC Stamp 2 microcontroller on your own PCB using this DIP chip. Recommended for high volume applications or those with limited P...

When power is applied to the magnetic lock, it turns on the unit's powerful built-in electromagnet. This electromagnet is attracted to the steel ar...

When power is applied to the magnetic lock, it turns on the unit's powerful built-in electromagnet. This electromagnet is attracted to the steel ar...

Raspberry Pi 4 has higher power requirments than other versions and require at least 3.0A. This USB-C Canakit power supply is 3.5A that is speciall...

16.5 Volt AC Wire-in transformer is wired directly to an electrical box. Typically used to power a security panel.

This 0.012" Muscle Wire® (aka shape memory Nitinol) is a one foot long piece of nickel-titanium alloy that can flex and contract when a specific am...

These DC powered heating pads are perfect for near-body heating applications. They get warm to the touch but not too hot as long as you provide the...

Polymorph is a non-toxic, biodegradable polyester with a low melting temperature of about 60°C (140°F). Prototype plastic parts can be made by simp...

Use in wide electronic applications ultra-thin wiring, RF/EMI shielding, antenna, etc.

This is a 2-pin JST RCY connector typically used for low-voltage applications running 3A or less. They are commonly found in RC vehicles. These com...

The SST Liquid Level Sensor provides single point liquid detection via a TTL compatible push/pull output. This optical liquid level sensor features...

Extend the distance between your wireless antennas and your wireless devices

The universal aluminum mounting hub allows you to mount custom wheels and mechanisms to 5 mm motor shafts. The hubs are sold in pairs. The set incl...

This is a simple robotics kit that is great for "getting a grip" on smaller robotics projects! Designed for use with a servo, the gripper kit is ea...

The Pimoroni Display-O-Tron HAT is a "shield" for the Raspberry Pi that provides you with a 16x3 character LCD, as well as a full ASCII character s...

Sporting a matrix of 64 (8 x 8) RGB LEDs and powered directly from the Pi, this is the most compact pocket aurora available. Unicorn HAT provides ...

Rotary encoders are used similarly to potentiometers. They're different from potentiometers in that an encoder has full rotation without limits. Th...

Sometimes you want a small input and a single button just won't cut it. A 5-way tactile switch allows for a joystick-like interface in a very small...

USB On-The-Go is a really useful USB specification! It allows some small devices that would usually be unable to act as a host to have limited host...

MG Chemicals Polyimide film is a lightweight, flexible 2 mils thick crystalline film with a silicone adhesive designed for 3D printers heated beds....

MG Chemicals high temperature masking tape is made of 8 mils thick beige crepe paper coated with a rubber adhesive designed for 3D printer heated b...