Skip to content
Free shipping in Canada on orders over $250 (exclusions apply)
Free Canadian shipping on orders over $250 (w/ exclusions)

Arduino, Pi, Microcontrollers, 3D Printing and Kits

Filters

  • $42.90 - $42.90
    $42.90
    $42.90 - $42.90
    $42.90

    1.75mm PLA Filament - Black, 1kg (PLA17BK1)

    MG Chemicals
    In stock

    • PLA filament is an ideal choice for 3D printing in homes, schools, and hobbyist workshops. Based on corn, t...

    View full details
    $42.90 - $42.90
    $42.90
    $42.90 - $42.90
    $42.90
  • Sold out
    $6.90 - $6.90
    $6.90
    $6.90 - $6.90
    $6.90

    Tiny Pager Motor (TPM2)

    Solarbotics
    Out of stock

    • Pager motor technology has made it easier for us to find a suitable replacement for the original TPM for su...

    View full details
    $6.90 - $6.90
    $6.90
    $6.90 - $6.90
    $6.90
    Sold out
  • $4.90 - $4.90
    $4.90
    $4.90 - $4.90
    $4.90

    Standard Motor (RM1A)

    Solarbotics
    In stock

    • This 030 form-factor motor with precious-metal brushes offers pretty good performance for a flat-sided moto...

    View full details
    $4.90 - $4.90
    $4.90
    $4.90 - $4.90
    $4.90
  • $8.40 - $8.40
    $8.40
    $8.40 - $8.40
    $8.40

    Geared Motor 143:1 Ratio, Inline/Offset Shaft (GM8)

    Solarbotics
    In stock

    • The GM8 is much like the GM2 gear motor but runs at nearly twice the speed. This 143:1 gear motor spins at ...

    View full details
    $8.40 - $8.40
    $8.40
    $8.40 - $8.40
    $8.40
  • $8.40 - $8.40
    $8.40
    $8.40 - $8.40
    $8.40

    Geared Motor 120:1 Ratio, 90 degree Shaft (GM7)

    Solarbotics
    In stock

    • The GM7 is a baby version of the popular GM3 gear motor. Designed by Mark Tilden to have tighter tolerances...

    View full details
    $8.40 - $8.40
    $8.40
    $8.40 - $8.40
    $8.40
  • Sold out
    $8.40 - $8.40
    $8.40
    $8.40 - $8.40
    $8.40

    Geared Motor 120:1 Ratio, Inline/Offset Shaft (GM6)

    Solarbotics
    Out of stock

    • The GM6 is a baby version of the popular GM2 gear motor. Designed by Mark Tilden, the GM6 has tighter toler...

    View full details
    $8.40 - $8.40
    $8.40
    $8.40 - $8.40
    $8.40
    Sold out
  • Sold out
    $13.90 - $13.90
    $13.90
    $13.90 - $13.90
    $13.90

    Geared Motor 81:1 Ratio - Pager motor (GM10)

    Solarbotics
    Out of stock

    • 81:1, 370RPM, 24.6mA (184mA stall) at 5V gives 3.6in*oz torque. Not bad, eh? They're a bit funky in that t...

    View full details
    $13.90 - $13.90
    $13.90
    $13.90 - $13.90
    $13.90
    Sold out
  • $8.40 - $8.40
    $8.40
    $8.40 - $8.40
    $8.40

    Geared Motor 224:1 Ratio, Inline/Offset Shaft (GM2)

    Solarbotics
    In stock

    • These impressive 224:1 gear motors are very comparable to a hobby servo for power, at a fraction of the cos...

    View full details
    $8.40 - $8.40
    $8.40
    $8.40 - $8.40
    $8.40
  • $38.90 - $38.90
    $38.90
    $38.90 - $38.90
    $38.90

    1.75mm PETG Filament - Natural, 1kg (PETG17NA1)

    MG Chemicals
    In stock

    • The Premium 3D Printer Filament—PETG is made with polyethylene terephthalate glycol-modified (PETG) pellets...

    View full details
    $38.90 - $38.90
    $38.90
    $38.90 - $38.90
    $38.90
  • $42.90 - $42.90
    $42.90
    $42.90 - $42.90
    $42.90

    1.75mm PLA Filament - White, 1kg (PLA17WH1)

    MG Chemicals
    In stock

    • PLA filament is an ideal choice for 3D printing in homes, schools, and hobbyist workshops. Based on corn, t...

    View full details
    $42.90 - $42.90
    $42.90
    $42.90 - $42.90
    $42.90
  • $27.80 - $27.80
    $27.80
    $27.80 - $27.80
    $27.80

    1.75mm High Impact Polystyrene (HIPS) Filament, White (HIP17WH1)

    MG Chemicals
    In stock

    • HIPS (High Impact Polystyrene) is mostly used with a dual extruder when printing ABS. HIPS is used to make ...

    View full details
    $27.80 - $27.80
    $27.80
    $27.80 - $27.80
    $27.80
  • $42.90 - $42.90
    $42.90
    $42.90 - $42.90
    $42.90

    1.75mm PETG Filament - White, 1kg (PETG17WH1)

    MG Chemicals
    In stock

    • The Premium 3D Printer Filament—PETG is made with polyethylene terephthalate glycol-modified (PETG) pellets...

    View full details
    $42.90 - $42.90
    $42.90
    $42.90 - $42.90
    $42.90
  • $41.00 - $41.00
    $41.00
    $41.00 - $41.00
    $41.00

    3mm PLA Filament - Black, 1kg (PLA30BK1)

    MG Chemicals
    In stock

    • PLA filament is an ideal choice for 3D printing in homes, schools, and hobbyist workshops. Based on corn, t...

    View full details
    $41.00 - $41.00
    $41.00
    $41.00 - $41.00
    $41.00