Arduino, Pi, Microcontrollers, 3D Printing and Kits
Filters
- Adafruit (1)
- Arduino (0)
- BusBoard (4)
- Canakit (3)
- Circuit-Test (4)
- Elenco (0)
- Hammond (0)
- LittleBits (0)
- Locus Engineering (0)
- MG Chemicals (0)
- NTE Electronics (0)
- Osepp (16)
- OWI (0)
- Parallax (0)
- Proto-Pasta (0)
- Provision (0)
- Raspberry Pi (0)
- RPE (0)
- Seeed (0)
- Solarbotics (9)
- Sparkfun (1)
- Velleman (6)
- XYZ Printing (1)
-
Original price $6.90 - Original price $6.90Original price$6.90$6.90 - $6.90Current price $6.90| /
Tiny Pager Motor (TPM2)
SolarboticsOut of stock- Pager motor technology has made it easier for us to find a suitable replacement for the original TPM for su...
Original price $6.90 - Original price $6.90Original price$6.90$6.90 - $6.90Current price $6.90| /Sold out -
Original price $4.90 - Original price $4.90Original price$4.90$4.90 - $4.90Current price $4.90| /
Standard Motor (RM1A)
SolarboticsIn stock- This 030 form-factor motor with precious-metal brushes offers pretty good performance for a flat-sided moto...
Original price $4.90 - Original price $4.90Original price$4.90$4.90 - $4.90Current price $4.90| / -
Original price $43.80 - Original price $43.80Original price$43.80$43.80 - $43.80Current price $43.80| /
Marble Machine Kit - Battery (KMMB)
SolarboticsIn stock- This is a soothing little marble mill that sends balls down a spiral ramp and cycles them back with a mill ...
Original price $43.80 - Original price $43.80Original price$43.80$43.80 - $43.80Current price $43.80| / -
Original price $8.40 - Original price $8.40Original price$8.40$8.40 - $8.40Current price $8.40| /
Geared Motor 143:1 Ratio, Inline/Offset Shaft (GM8)
SolarboticsIn stock- The GM8 is much like the GM2 gear motor but runs at nearly twice the speed. This 143:1 gear motor spins at ...
Original price $8.40 - Original price $8.40Original price$8.40$8.40 - $8.40Current price $8.40| / -
Original price $8.40 - Original price $8.40Original price$8.40$8.40 - $8.40Current price $8.40| /
Geared Motor 120:1 Ratio, 90 degree Shaft (GM7)
SolarboticsIn stock- The GM7 is a baby version of the popular GM3 gear motor. Designed by Mark Tilden to have tighter tolerances...
Original price $8.40 - Original price $8.40Original price$8.40$8.40 - $8.40Current price $8.40| / -
Original price $8.40 - Original price $8.40Original price$8.40$8.40 - $8.40Current price $8.40| /
Geared Motor 120:1 Ratio, Inline/Offset Shaft (GM6)
SolarboticsOut of stock- The GM6 is a baby version of the popular GM2 gear motor. Designed by Mark Tilden, the GM6 has tighter toler...
Original price $8.40 - Original price $8.40Original price$8.40$8.40 - $8.40Current price $8.40| /Sold out -
Original price $13.90 - Original price $13.90Original price$13.90$13.90 - $13.90Current price $13.90| /
Geared Motor 81:1 Ratio - Pager motor (GM10)
SolarboticsOut of stock- 81:1, 370RPM, 24.6mA (184mA stall) at 5V gives 3.6in*oz torque. Not bad, eh? They're a bit funky in that t...
Original price $13.90 - Original price $13.90Original price$13.90$13.90 - $13.90Current price $13.90| /Sold out -
Original price $8.40 - Original price $8.40Original price$8.40$8.40 - $8.40Current price $8.40| /
Geared Motor 224:1 Ratio, Inline/Offset Shaft (GM2)
SolarboticsIn stock- These impressive 224:1 gear motors are very comparable to a hobby servo for power, at a fraction of the cos...
Original price $8.40 - Original price $8.40Original price$8.40$8.40 - $8.40Current price $8.40| / -
Original price $44.80 - Original price $44.80Original price$44.80$44.80 - $44.80Current price $44.80| /
"Useless Box" Kit (60005)
SolarboticsIn stock- What's more useless than a switch that does nothing? How about a switch that activates an actuator to turn ...
Original price $44.80 - Original price $44.80Original price$44.80$44.80 - $44.80Current price $44.80| /
Sort by